On the flip side, if the furniture doesn’t look chippy enough you can sand the areas where natural wear and tear may have occurred. The stain you use will determine the color of the wood once it’s finished. Staining helps reduce contrasts between different wood varieties that may be present in your furniture. Oil-based stains penetrate into the wood without raising the grain but carry a strong odor. Water-based stains are more environmentally friendly and offer easy cleanup using soap and water.

Allow the stripper to sit on the table according to the instructions on the package. When the stripper starts to bubble or crinkle, use a scraper or steel wool to remove all existing finishes from the table. Paint the coffee table if you want it to be a totally different color. Apply a layer of primer to the wood using a 4 in paintbrush and let it dry for 1 hour. Paint over the primer using a paint of your choice, working with the grain and using long, even strokes. Let the paint dry for 4-8 hours, then add a second coat if you can still see any of the primer through the paint.

Condition Of The Wooden Table

With these options in mind, you may still be wondering if refinishing your wooden piece is the right way to go. If you’re uncertain, then you should be aware of the different signs that indicate it’s time to refinish your wood furniture. By keeping https://rialf.webgarden.com/ the existing finish, you can simply clean and wax the surface and revive the piece. This is the simplest method, and it works on wooden furniture that’s still in good condition. If a piece is painted, there’s usually a reason for it.

Clean The Table’s Surface And Legs

Remember, light coats with a light sanding in between. Let the final coat cure completely before using the table top. We loved the result on the table from my sister, since it deepened the color only slightly and didn’t disguise any of the wood grain. It went on just as easily and we love the satin finish.

If you want the finish to be darker, you can apply 1-2 additional coats of stain after the first coat dries, wiping off excess stain after each coat. Make sure to let the second coat dry before you apply a third. Paint the table legs with a coat of Zinsser BIN White Primer-Sealer do not sand afterwards.